SABFOIL Stabilizer Shims -0,5°/-1°/-1,5°/-2°/-2,5°/-3°
10,00 €*
Expédition immédiate, livraison d'env. 2 à 5 jours ouvrables
Informations sur le produit "SABFOIL Stabilizer Shims -0,5°/-1°/-1,5°/-2°/-2,5°/-3° "
These six shims can change the incidence angle of your stabilizer for -0,5°/-1°/-1,5°/-2°/-2,5°/-3° degrees
Les clients ont également acheté
Hardware Kit M6 to M8 Screws Adapters Washers adapter from M8 to M6 x 3 For connecting M6 screws in M8 holes.
Foam Pads for Plate Foam Pad x 5 Replacement set of foam pads to apply on your Kraken Modular System plate (P02K/CP02K).
Hardware Kit WL950/WL1150/WL1350/WL1550/WL1750/WM999 Flat Head Screw Hex M8x35 x 2 Flat Head Screw Hex M8x40 x 1 Screws to connect WL950/WL1150/WL1350/WL1550/WL1750 front wings to fuselage.
Allen Keys, Torx Keys and Lithium GreaseAllen Key 3mm x 1Allen Key 5mm x 1Torx Key 3mm x 1Lithium Grease x 1Hexagonal Allen Key 6mm x 1Set of keys and lithium grease for the assembly and maintenance of your hydrofoil kit.
Hardware Kit S325/S355/S375/S380/S395/S425/S430/S450/S480/S483 Flat Head Screws Torx M6x20 x 1 Flat Head Screws Torx M6x16 x 1 Screws to connect S325/S380/S425/S430/S450/S480/S483 stabilizers to fuselage.
Sacrificial Anodes Replacement Kit Sacrificial Anode x 2 Cylindrical Head Screws M4x10 x 4 SystemKraken Modular System
Hardware Kit Plate/Mini Tuttle to Mast Cylindrical Head Screws M6x35 with Hexagon x 2 Washers 6x10x1 x 2 Torx Countersunk Head Screws M6X40 x 2 Use the two M6x35 cylindrical head screws together with the 6x10x1 washers to connect the Aluminum Plate (P02K) or the Mini Tuttle (T03K) to your mast.Use the two M6x40 torx countersunk head screws to connect the Carbon Plate (CP02K) to your mast.
Hardware Kit WT790/WT1100/WT1250/WM699/WM799 Flat Head Screws Hex M8x35 x 1 Flat Head Screws Hex M8x30 x 2 Screws to connect WT790/WT1100/WT1250/WM699/WM799 front wings fuselage.
Lithium Grease (75 ml)High-quality lubricating grease based on lithium soaps.Particularly resistant to water, does not dirty, lubricates and protects any type of mechanical coupling from corrosion and wear. Indispensable for nautical uses.The package contains 75 ml of lithium grease.
This cover is ideal for maximum protection when move your stabilizer The cover has been built from high quality, heavy duty fabric to keep your stabilizer safely stowed when you're traveling. It is equipped with internal foam protection with protective outer shell. The hook and loop strip closure is pratical for a rapid use. Please check the compatibility in the dedicated tab